The specific situation and application scope of the connection

The specific situation and application scope of the connection structure of the small granulator
1. The outer shell is a single rectangular shape, consisting of three major components: a rolling bearing frame, a reducer, and an electric motor shaft. The feeding hopper is connected to the rolling bearing frame and slides towards the main engine. The front end of the motor shaft website is developed to lift, touch the ground widely and stably, so it does not need to be installed and can be placed in the room for application at will.

2. Particle production and manufacturing control system: The horizontal control system of the rotating drum is located under the hopper, supported by rolling bearings on the front, back, left, and right sides. It rotates in reverse according to the gear rack transmission system. The front seat bearing with inner hole is a theme movable type. When assembling and disassembling, if three screws are unscrewed, the front seat bearing and the rotating drum can be pulled out successively. The two ends of the rotating drum are equipped with symmetrical convex coupling joints, which are not limited by the reverse direction and are easy to assemble and disassemble.
3. Stainless steel screen clamp: The control system is made of steel pipes on both sides of the rotating drum, with a long groove in the middle. The two sides of the stainless steel screen are placed in the groove, and the rotating handle wraps the stainless steel screen around the inner hole of the rotating drum. The handle is supported by a spur wheel, and the tightness can be controlled.
4. Reducer: The worm gear transmission system is selected with a transmission ratio of 1:30. The gearbox can store the machine to ensure that the gear rod, transmission gear, and worm gear are well lubricated and free of noise. The toe of the worm gear is equipped with an eccentric rod to drive the gear rod to reciprocate, and the gear shaft that meshes with the gear rod rotates in reverse.
5. Machine seat motor: The motor mounting plate is hinged to the motor shaft, and the other end is hinged to the nut. When the handle on the motor shaft is rotated, the screw rod is controlled to rotate, and the nut drives the motor plate up and down to adjust the tension of the V-belt.
applicative categories
1. This machine is a device that uses the swinging effect of a rotating cylinder to grind wet powder raw materials into particles based on stainless steel mesh screens. It can also be widely used for crushing crushed blocks into ready-made particles.
2. In the field of chemical drugs, it is used as a mixed powder that is ground into particles, dried for compression into tablets, and can also be crushed into blocks during storage or formed into blocks during chemical processing. Used in the food industry for processing candies and mixtures, as well as malt milk and other products. In other industries such as ceramics and plastics, mixed materials become formed particles.
3. It is not suitable for solid, liquid, slurry, or ground use.
4. The mesh size of the mesh sieve should be determined by the user according to the particle size requirements.